RunCam Device Protocol. RunCam Device Protocol could be the serial interaction protocol initially developed when it comes to RunCam separate and analog digital digital digital cameras.

RunCam Device Protocol. RunCam Device Protocol could be the serial interaction protocol initially developed when it comes to RunCam separate and analog digital digital digital cameras.

RunCam Device Protocol. RunCam Device Protocol could be the serial interaction protocol initially developed when it comes to RunCam separate and analog digital digital digital cameras.

RunCam Device Protocol

RunCam Device Protocol could be the communication that is serial initially developed for the RunCam separate and analog cameras.

The protocol itself supports not merely complete digital camera osd menu navigation but additionally triggering recording on separate style digital cameras in addition to interacting the available sd-card room, syncing the present date, writing into the osd and switching the digital digital camera or wifi function (if available) on / off.

Not absolutely all attributes of the protocol are supported in betaflight but both betaflights help and also the protocol it self have been in continued development.

Recently just like TBS Smartaudio and IRC Tramp others (as an example Caddx) began to follow help for the protocol within their digital digital digital cameras.

Presently supported features in betaflight

The protocol that is current are obtainable right right here:

Supported cameras/devices and functions

Analog/classic fpv cameras

Any RunCam Camera that supports UART digital digital digital camera settings should work.

Micro Swift 3, Runcam Racer 2, etc.

RunCam Split cameras (1,2,mini and mini 2 etc.) also work nonetheless might need a firmware enhance. The runcam that is first delivered with another type of protocol – ensure that you update it in either case as more recent firmwares enhanced different things.

OSD Menu Control

Going into the osd menu to alter settings should assist exactly the same stick commands as FPV Camera Control

Camera Button Simulation (Record/Photo/Wifi/Power Key)

Firmware: BetaFlight Firmware (≥3.2.0) Configurator computer software: Betaflight Configurator (≥3.2.0)

Any UART that bicupid is available interface the BetaFlight

1.Connect the RunCam separate utilizing the UART program for the trip Controller

2.Make the trip Controller recognize the Split

As an example, we connect the separate towards the UART 3 program in the BetaFlight: link the journey controller into the computer, open the Betaflight then Configurator. Into the Peripherals line for the line UART3 (regarding the Ports tab), choose RunCam unit and then click Save And Reboot.

3.Instructions regarding the functions associated with the digital digital digital camera and transmitter that is assigning in their mind

Within the Betaflight Configurator, navigate towards the Modes tab. You can find brand new CAMERA WI-FI, CAMERA ENERGY and CAMERA CHANGE modes.

CAMERA WI-FI: turn on/off the WIFI of this digital digital camera. Whenever when you look at the OSD for the digital digital camera, it is utilized to ensure your selection. CAMERA ENERGY: start/stop the video. Whenever within the OSD regarding the digital camera, this is certainly used to maneuver into the next menu product. CAMERA CHANGE MODE: switch among the list of three modes, movie, picture and OSD mode that is setting. Whenever when you look at the OSD regarding the digital digital digital camera, this may leave the menu. Assign any channel that is available the event you’ll need, as an example:

Assign the AUX1 into the CAMERA WI-FI, range 1900-2100 Assign the AUX2 towards the CAMERA POWER, range 1900-2100 Assign the AUX3 into the CAMERA CHANGE MODE, range 1900-2100

4.Assign the channel to your switch for the controller

Please select your Model in the controller, then usage of the Mixer screen and designate the channel to your switch of this controller. Take opentx 2.2.0 as an example, assign the channels CH5, CH6, and CH7 to SA, SB, SD correspondingly.

Energy the trip Controller as well as the RunCam separate

Set the SA to your base, the digital camera turns on/off the WIFI Set the SB to your base, the digital camera starts/stops the video clip Set the SD towards the base, the digital camera switches among the list of three modes: video clip, picture and OSD mode that is setting

Caddx Turtle v2

Caddx additionally applied help when it comes to RunCam Device protocol via their final firmware up-date. Please be aware nevertheless that just the turtle v2 correctly supports UART settings whilst the v1 had some connections that are incompatible the board despite having UART pads.

For the v1 you are able to use FPV Camera still Control to enter the OSD and get a handle on the digital camera via your transmitter.

Beware that OSD control is disabled during recording.

OSD Menu Control

Going into the osd menu to alter settings should make use of the exact same stick commands as FPV Camera Control

Camera Button Simulation (Recording)

Just like the RunCam Split recording that is starting/stopping a switch is supported. Stick to the directions outlined above to create it.

Other supported devices

RunCam Control Adapter (OSD Cable Simulation)

The RunCam Control Adapter, which links amongst the OSD pin plus an UART in the FC, allows navigation of this OSD menu through the transmitter. Unlike the FPV Camera Control nevertheless no extra resistors or capacitors are needed.

With respect to the device some shortcut keys are additionally supported. As an example keeping roll pressed to towards the right will switch the presently chosen scene when making use of a Micro Swift2.